What we fabricate
Every job runs custom through our shop. We do not stock pre-made parts. You send drawings or sketches, we cut, bend, and finish to your spec.
ACM panels
Reveal-edge and rout-and-return panels in any size. Our PDX Series EVO and Series 200 systems handle curtain wall and rainscreen jobs.
See ACM panel optionsParapet coping
Continuous coping caps for parapet walls. Aluminum or galvanized steel, in stock gauges or per-spec.
Coping fabrication detailsMetal flashing
Counter flashing, drip edge, step flashing, sill pans, head flashing, custom profiles. Anything that bends, we can make.
Flashing servicesSaddles and scuppers
Roof saddles, crickets, scuppers, gutter outlets. Welded or mechanically fastened.
Saddles and scuppersThe shop on NE Portal Way
We run a full custom fab shop at 19140 NE Portal Way, off the I-205 corridor. Easy in-and-out for contractor pickups.
The Muratori V-groove is what lets us run reveal-edge ACM panels at production speed instead of by hand. That is specialty gear most flashing shops do not have, and it is why we can quote ACM jobs at prices that beat the bigger shops.
Main equipment
Why contractors order from PDX Panels
Price
We are one of the most price-competitive fabrication shops in the Portland metro for ACM panel work. We run V-groove panels in-house instead of subbing them out, which cuts our cost and yours.
ACM panel capability
Most Portland sheet metal shops do flashings and coping but stop short of ACM. We do all of it under one roof. One vendor, one PO, one delivery.
Custom every time
We do not stock parts. Every order runs to your drawing or sketch. That means you get exactly what you specified, with no "close enough" substitutions.
Portland projects we have fabricated for
Some of the work we have done across the Portland metro:
How we work with roofing and siding contractors
You do not need finished CAD drawings. A photo, a hand sketch, or notes on a torn-off shop drawing works. We have been quoting jobs for Portland contractors since 2009, so we read field notes the same way you do.
Architects: Drawings can be sent direct. We will work with whoever ends up owning the install on your behalf.
Typical workflow
Send drawings or sketches to orders@pdx-panels.com or call (503) 914-0210
We quote - most quotes back within 24 hours
PO or verbal go-ahead and we cut steel
You pick up at the shop or we deliver
No minimum order. A single piece of step flashing is fine. So is a 200-piece coping run.
Where we deliver
Our shop is in Northeast Portland. We deliver across the metro. For projects outside the metro, we ship - most West Coast freight to LTL carriers works for crated panel orders.
What contractors say
"Really great service. I was in a jam needing special large cut and bent flashing. Quoted me in an hour, had it ready next day. When I came to pick it up I made a mistake on the bend, they did the extra work on the spot."
Brian Campbell
"PDX Panels are my go-to supplier for custom flashings and whole panel systems. They do great work and always get me my materials quickly."
Sam Schwerdtfeger
"Very good company, very good quality. I recommend it to everyone."
Sasha Prozapas
Frequently asked questions
Get your Portland sheet metal job quoted
Send drawings or call. Quotes back in under 24 hours.
19140 NE Portal Way, Portland, OR 97230
Monday – Friday, 7 AM to 5 PM